Pioneer VRD1160-A Operating Instructions Manual page 69

Pioneer dvd player operating instruction
Table of Contents

Advertisement

Available languages

Available languages

Additional Information
MPEG audio
An audio format used on Video CDs and
some DVD discs. This unit can convert
MPEG audio to PCM format for wider
compatibility with digital recorders and AV
amplifiers. See also PCM.
MPEG video
The video format used for Video CDs and
DVDs. Video CD uses the older MPEG-1
standard, while DVD uses the newer and
much better quality MPEG-2 standard.
Packed PCM (DVD-Audio only)
A lossless compression system that enables
more PCM audio to be stored on a DVD-
Audio disc than would otherwise be possi-
ble.
PCM (Pulse Code Modulation)
The most common system of encoding
digital audio, found on CDs and DAT.
Excellent quality, but requires a lot of data
compared to formats such as Dolby Digital
and MPEG audio. For compatibility with
digital audio recorders (CD, MD and DAT)
and AV amplifiers with digital inputs, this
unit can convert Dolby Digital, DTS and
MPEG audio to PCM.
PBC (PlayBack Control) (Video CD only)
A system of navigating a Video CD through
on-screen menus recorded onto the disc.
Especially good for discs that you would
normally not watch from beginning to end all
at once—karaoke discs, for example.
Regions (DVD-Video only)
These associate discs and players with
particular areas of the world. This unit will
only play discs that have compatible region
codes. You can find the region code of your
unit by looking on the rear panel. Some discs
are compatible with more than one region
(or all regions). See also page 9.
S1 S-video output
This S-video signal format includes aspect
ratio information (4:3 or 16:9) within the
video signal. TVs which are compatible with
S1 S-video automatically switch aspect ratio
according to the signal. See also page 52.
S2 S-video output
S2 is an enhanced version of S-video which,
in addition to aspect ratio information,
contains letterbox / pan & scan information.
Widescreen TVs which are compatible with
S2 S-video automatically switch aspect ratio
according to the signal. See also page 52.
Sampling frequency
The rate at which sound is measured to be
turned into digital audio data. The higher the
rate, the better the sound quality, but the
more digital information is generated.
Standard CD audio has a sampling fre-
quency of 44.1kHz, which means 44,100
samples (measurements) per second.
Slidshow (DVD, Video CD)
A feature of some DVD discs in which still
pictures recorded on the disc cycle automati-
cally as the audio is played. See also
Browsable Pictures.
Super Audio CD (SACD)
Super Audio CD is a high quality audio disc
format that can accomodate high sampling
rate stereo and multi-channel audio, as well
as conventional CD audio all on the same
disc.
09
69
En

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dv-656a

Table of Contents