Answering Calls; Auto Answer - Grandstream Networks DP750 User Manual

Answering Calls

When receiving an incoming call, you can answer the call using following steps:
•
Earpiece mode:
Press Dial Key
•
Speakerphone mode:
Press Speaker Key
•
Headset mode:
Press Dial Key
headset.
Note:
- To answer an incoming call during an established call, press Dial Key
, or the "Answer" softkey. The incoming call is answered, and the original call is placed on hold.
- You can switch off the ringer temporarily by pressing Silent softkey.

Auto Answer

Users can enable Auto Answer feature to accept and automatically answer incoming calls.
If enabled, DP720 Handset will automatically answer incoming calls using speaker mode.
To activate / deactivate the auto answer feature:
•
Using DP720 Handset Menu
1. Press Menu (left softkey
2. Use arrow keys to reach Settings
up/down arrow keys.
3. Switch between Enabled/Disabled using left/right arrow keys and "Save" after Enabling / Disabling
the option.
•
Using DP750 Base Station Web Interface
1. Access DP750 Base Station Web Interface.
2. Go to DECT  Handset Settings  HS# Settings.
3. Set "Enable Auto Answer" to "Yes". (By default, set to "No").
to pick up the call, or "Accept" softkey (left softkey
to pick up the call.
to pick up the call, or "Accept" softkey (left softkey
or the selection key
 User Settings, and navigate to Auto Answer using the
DP750/DP720 User Guide
).
) using a connected
, or the Speaker Key
) to bring up operation menu.
P a g e | 55