Change Menu And Lcd Timeout; Figure 15: Network Settings Configuration - Grandstream Networks DP750 User Manual

1. Press Menu (left softkey
2. Use arrow keys to reach Settings
3. Enter the system PIN code (default: 0000) and press the softkey "Done" (left softkey
4. To change to static IP, press
5. Enter valid values in the IP Address, Subnet Mask, Gateway, DNS Server fields.
6. Press softkey "Save" (
Note: A prompt message will be displayed to confirm that the new settings are saved successfully
7. The DP720 will display a reboot confirmation message, select "Yes" to apply the new settings or "No"
to avoid rebooting the DP750.

Change Menu and LCD Timeout

1. Press Menu (left softkey
2. Use arrow keys to reach Settings
or the selection key
and access Network Settings menu.
or to select Static from the IP Settings field.
) to save and apply the new changes.

Figure 15: Network Settings configuration

or the selection key
.
DP750/DP720 User Guide
) to bring up operation menu.
) to bring up operation menu.
).
P a g e | 35