Switching Audio Channels; Switching Camera Angles - Pioneer DVR-310 Operating Instructions Manual

Playback
• Press AUDIO repeatedly to select an audio
soundtrack.
Audio : 1/2
• The sound may drop out for a few seconds when
switching soundtracks.
• Some discs feature both Dolby Digital and DTS
soundtracks. There is no analog audio output when
DTS is selected. To listen to the DTS soundtrack,
connect this recorder to a DTS decoder or AV amp/
receiver with built-in DTS decoder via the digital
output. See Connecting to an AV amplifier or receiver
on page 17 for connection details.

Switching audio channels

VR mode CD Video CD
For VR mode content recorded with bilingual audio, you
can switch between left (L) channel, right (R) channel, or
1
both (L+R).
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
Some Super VCDs have two soundtracks. With these
discs you can switch between the two soundtracks as
well as individual channels in each.
AUDIO
1 To display/switch the audio channel, press
AUDIO repeatedly.
The audio channel(s) currently playing are indicated on-
screen.
VR mode
• L+R – Both channels (default)
• L – Left channel only
• R – Right channel only
Note
1.When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
switch the audio channel. Set Dolby Digital Out to Dolby Digital
if you need to switch the audio channel.
Dolby Digital 2/0CH
Super VCD WMA/MP3
CD Video CD WMA/MP3
• Stereo – Stereo (default)
• 1/L – Left channel only
• 2/R – Right channel only
Super VCD
• 1 Stereo – Soundtrack 1 / Stereo (default)
• 1 L – Soundtrack 1 / Left channel
• 1 R – Soundtrack 1 / Right channel
• 2 Stereo – Soundtrack 2 / Stereo
• 2 L – Soundtrack 2 / Left channel
• 2 R – Soundtrack 2 / Right channel

Switching camera angles

DVD-Video
Some DVD-Video discs feature scenes shot from two or
more angles—check the disc box for details: it should be
marked with a icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the same icon
appears on screen to let you know that other angles are
available (this can be switched off if you prefer—see
Angle Indicator on page 73).
AUDIO
TOP MENU
• To switch the camera angle, press ANGLE.
• The angle number is displayed on-screen.
• If the disc was paused, playback starts again with the
new angle.
• Repeat play is canceled if you change the angle while
repeat playback is active.
• You can also change the angle from some DVD-Video
disc menus. Press TOP MENU or MENU to access.
PCM (see Dolby Digital Out on page 70) or listen via the analog outputs
ANGLE
MENU
06
53
En