Selecting A Disc On-Screen; Searching For A Disc, Title, Chapter, Track, Or Location On A Disc - Pioneer DV-F727 Operating Instructions Manual

Selecting a Disc On-Screen

2,3
(Cursor)
4
7
PREVIOUS 4
4 ¢
1
1
Press SUB SETUP.
2
Move the cursor control joystick down to
enter the Sub Setup screen Text menu.
3
Move the cursor control joystick to highlight
the disc number of the disc you want to play .
If the disc you want to play is not displayed on the
current screen, use PREVIOUS 4 and NEXT ¢
to change the set of discs being displayed.
4
Press PLAY 3.
Playback of the selected disc begins.
To input disc title and artist name information
in the Text menu page
Refer to the section "Inputting and Changing Text
Information" starting on page 31.
To perform a disc search for a particular disc
number, title, or artist in the Text menu page
Refer to the section "Searching for a Disc, Title, Chapter,
Track, or Location on a Disc" on this page.
To sort the discs in the rack according to
number, title, or artist in the Text menu page
Move the cursor control joystick right or left to select a
category and then press ENTER.
• When the Disc column is selected, the discs are sorted by
their order in the disc rack.
• When the Type column is selected, the discs are sorted by
their format.
• When either Title or Artist columns are selected, the discs are
sorted in alphabetical order.
Note
When Master-Slave connections are made, discs on the Master player
are numbered from 1 to 300 and 301 to 600 on the Slave player.
3 8
NEXT ¢
1 ¡
e E
Searching for a Disc, Title,
Chapter, Track, or Location on
a Disc
– DVD/Video CD/CD
This player offers different ways of accessing the
information on a DVD, Video CD, or CD. Using SEARCH
MODE, you can search for titles or chapters on a DVD,
tracks on a Video CD or CD, and even select the point in
time to start playback.
3
7
4 ¢
e
2
Title : 37
1
Press SEARCH MODE repeatedly during
playback of a disc to select the type of search.
The type of search changes which each press as
follows.
3 Title
Off 2 Disc 2
When playback is stopped, only Disc search is
performed.
2
Press the number button(s) of the desired
disc, title, chapter or track or of the specific
time where you would like to begin playback.
• To select number 3, press 3.
• To select number 10, press 1 and 0.
• To select number 37, press 3 and 7.
• To select number 256, press 2, 5, and 6 (disc only).
When performing a time search:
• To select 21 minutes, 43 seconds, press
2, 1, 4, and 3.
• To select 1 hour, 14 minutes, press 7, 4, 0, and 0.
3
Press PLAY 3.
Playback of the selected disc, title, chapter or track
starts. When a time search is performed, playback
begins at the appointed time.
3 8
1 ¡
1
E
3 Chapter/Track
Time 2
continued
35