Pioneer DV-F727 Operating Instructions Manual page 22

Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in the previous screen.
Settings: No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of
96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of
96 kHz.
Don't Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
Note
When a DVD is played back in the letter box format, Linear PCM
digital audio output is automatically downsampled to 48 kHz
(when the original signal is 96 kHz). In order to hear audio at the
sampling rate of 96 kHz, set the Setup screen Video menu [TV
Screen] setting to either "Wide" or "4:3 (Pan & Scan)" (page
43).
22
Audio1 2 Video Language General
Setup Navigator
Amp Connection
No
96 kHz PCM Audio Yes
Don't Know
Digital jack not compatible with 96 kHz
Move Select Exit
ENTER SETUP
* Factory setting
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Audio1 2 Video Language
Setup Navigator
Exit Setup Navigator
Confirm setup adjustments
Move
ENTER
Settings: Valid*
Select to have the player make all of the
necessary audio, video and language settings
automatically.
Invalid
Select to exit the Setup Navigator without
changing any of the system settings.
Redo
Select to return to the [OSD Language] screen
of the Setup Navigator and do the settings
again.
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen General menu appears. Press Setup
to close the Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 39.
General
Valid
Invalid
Redo
Select Exit
SETUP
* Factory setting