Speaker Installation; Speaker Distance - Pioneer DV-668AV Operating Instructions Manual

08 Initial Settings menu
• When set to 5.1 Channel there is no
optical/coaxial digital or HDMI output
when playing DVD-Audio discs.
• Some DVD-Audio discs don't allow down-
mixing of audio. These discs always
output multi-channel audio regardless of
the setting made here.

Speaker Installation

• Set in Setup Navigator (default: L/R:
Large | C: Large | LS/RS: Large| SW: On)
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect any digital audio
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Use the Speaker Installation screen to tell
the player what kinds of speakers you have
connected.
1 Use the Joystick to move the cursor
up/down to select a speaker.
• The L and R, and RS and LS speakers are
paired; you can't set them differently.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
74
En
3 2 Channel
Audio Output Mode
Speaker Installation

Speaker Distance

3 Fix
Channel Level
L Large
C Large
R Large
RS Large
LS Large
SW On
2 Move the cursor right to modify the
selected speaker.
3 Use the Joystick (up/down) to change
the current setting.
• You can see the effect of your changes in
the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the main
speaker cone in the speaker is 12cm or
more, set to Large, otherwise set to Small
(or Off if you don't have that speaker).
• If you set the front L and R speakers to
Small, the center and surround speakers
are automatically set to Small and the
subwoofer to On.
• The subwoofer can only be set to On or
Off.
4 Move the cursor left to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the
Speaker Installation screen.
Speaker Distance
• Default setting: all speakers 3 m
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language Speaker Distance
Display Channel Level
Options
Speakers
i.LINK Setup
3 2 Channel
3 Fix