Controls And Displays; Front Panel - Pioneer DV-668AV Operating Instructions Manual

03

Controls and displays

Chapter 3
Controls and displays
The following illustrations show the DV-868AVi,
but controls and displays for the DV-668AV are
the same except where indicated.

Front panel

1 2
STANDBY
POWER
OFF ON
RW
COMPATIBLE
16
1 POWER switch (DV-868AVi only)
Press to switch the player on or off (the
player can be put into standby using the
remote control; the STANDBY indicator
above the button lights when in standby).
STANDBY/ON (DV-668AV only)
Press to switch the player into standby.
2 STANDBY indicator (DV-868AVi only)
Lights when in standby.
3 i.LINK indicator (DV-868AVi only)
Lights when this player is recognized by
another i.LINK compatible component.
4 HDMI indicator
Lights when this player is recognized by
another HDMl or DVI/HDCP compatible
component.
24
En
3 4 5 6
HDMI PROGRESSIVE PURE AUDIO
Î
15
7
AUDIO/VIDEO
14
5 PROGRESSIVE button/indicator
Press to switch the component video output
mode between progressive and interlace. The
indicator lights in progressive scan mode.
See also Component Out on page 62.
• This player is compatible with both PAL
and NTSC progressive scan formats.
However, your TV must also be
progressive scan compatible to take
advantage of this feature.
6 PURE AUDIO button/indicator
When the player is stopped, press to switch
off/on the front panel display and disable the
video and digital outputs*. Use this when you
want to hear audio from the analog outputs
with no interference from other signals (when
listening to a DVD-Audio disc, for example).
The indicator lights when the Pure Audio
feature is switched on.
* These include i.LINK, HDMI, and the
coaxial and optical digital outputs.
8 9 10 11
OPEN/CLOSE
)
& *
$! ⁄›
13 12
‹