Using The On-Screen Displays - Pioneer DV-668AV Operating Instructions Manual

04 Getting Started
• If you have connected an HDMI-
compatible device, the HDMI settings
screen will appear instead of the setup
screens below. See HDMI Settings on
page 71 to make the necessary settings.
1 Use the Joystick (up/down) to choose
a language, then press ENTER.
Let's Get Started Menu
Select the display language
using the cursor keys on the remote
Choose one then press Enter
2 Use the Joystick (left/right) to select
either 'Wide screen (16:9)' or 'Standard
size screen (4:3)' according to the kind of
TV you have, then press ENTER.
Let's Get Started Menu
32
En
SETUP TOP MENU
MENU
– MULTI SPEED +
ENTER
VIDEO
RETURN ADJUST DIMMER JOG MODE
V.ADJ FL JOG
7 3 8
E E/
/
4 ¢ 1 ¡
PLAY MODE SURROUND
English
français
Deutsch
Italiano
Español
Nederlands
What kind of TV do you have?
Use the / cursor buttons
to choose, then press ENTER
Wide screen (16:9) Standard size screen (4:3)
3 Press ENTER again to finish setting up.
Let's Get Started Menu
Setup complete
If you're finished setting up,
choose [Complete],
to start again choose [Back]
Complete
• Select Back then press ENTER if you want
to go back and change the setting you just
made.

Using the on-screen displays

For ease of use, this player makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you'll need to use them when setting up the
player, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
All the screens are navigated in basically the
same way, using the joystick to change the
highlighted item and pressing ENTER to
select it.
• Throughout this manual, 'Select' means
use the joystick to highlight an item on-
screen, then press ENTER.
Back