Basic Playback Controls - Pioneer DV-757AI Operating Instructions Manual

04 Getting Started
1 If the player isn't already on, press
STANDBY/ON to switch it on.
If you're playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
Press 0 OPEN/CLOSE to open the disc
2
tray.
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
Never load more than one disc at a time.
Press 3 (play) to start playback.
4
If you're playing a DVD or Video CD, a menu
may appear. See pages 33-34 for how to
navigate these.
If you're playing an MP3 disc, it may take a
few seconds before playback starts, depend-
ing on the complexity of the file structure on
the disc.

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The folllowing
chapter covers more playback features in
more detail.
32
En
Button What it does
3
Starts playback.
DVD and Video CD: if the
display shows RESUME,
playback starts from the
resume point.
8
Pauses a disc that's playing,
or restarts a paused disc.
7
Stops playback.
DVD-Video and DVD-RW and
Video CD: Display shows
RESUME. Press 7 (stop) again
to cancel the resume function
(The resume function is also
cancelled when you eject the
disc tray.).
1
Press to start fast reverse
scanning. Press 3 (play) to
resume normal playback.
¡
Press to start fast forward
scanning. Press 3 (play) to
resume normal playback.
4
Skips to the start of the
current track or chapter, then
to previous tracks/chapters.
¢
Skips to the next track or
chapter.
Numbers Use to enter a title/group/track
number. Press ENTER to select
(or wait a few seconds).
• If the disc is stopped, play-
back starts from the selected
title/group (for DVD) or track
number (for CD/SACD/Video
CD/MP3).
• If the disc is playing,
playback jumps to the start of
the selected chapter or track
(within the current group for
DVD-Audio).