Tascam DR-100MKIII Reference Manual page 9

4 Phantom power supply status
When the PHANTOM switch is set to ON, this icon shows the
phantom power supply voltage. (See "Setting the phantom
power voltage" on page 22.)
No icon Phantom power off
Phantom power on with +48V supplied
Phantom power on with +24V supplied
5 Power supply status
When powered by batteries, a
for the type of battery being used. (See "Set the priority
battery type" on page 40.)
The amount of battery power remaining is shown in the
battery icons with 14 levels for the built-in battery and 3
levels for the AA batteries.
Built-in battery
AA batteries
When the battery type being used runs out of power, its icon
blinks and the moves to the icon for the other type of
t
battery.
If both types of batteries run out power, their icons blink,
indicating that the unit will soon turn off (enter standby).
6 File format
This shows the format, sampling frequency and number of
channels of the playing file.
7 Playback speed/loop playback status
This shows the setting status of the VSA and loop playback
functions.
This shows the VSA playback function status.
SPEED
This shows the loop playback function status.
LOOP
8 Transport status (stopped/playing)
This icon shows the recorder operation status.
Indicator Meaning
Stopped at the beginning of the file
8
Paused
9
Playing back
y
Searching forward
,
Searching backward
m
Skipping to the beginning of the next file
/
Skipping to the beginning of the current or
.
previous file
9 Loop playback IN (starting) and OUT (ending) points
When the loop playback function is on, these show the loop
IN (starting) and OUT (ending) points.
IN (starting) point
OUT (ending) point
0 Level meters
These show the maximum (peak) playback levels.
q Playback folder name
This shows the name of the folder that contains the file
playing back.
2 – Names and functions of parts
appears next to the icon
t
e e
e e
w Playback file name
The file name or tag information of the file currently being
played back is shown.
When ID3 tag information is available for an MP3 file being
played, it is given priority for display.
If a file is protected, a mark appears before the file name.
(See "Protecting files" on page 34.)
NOTE
ID3 tag information includes the titles and artists names
that can be saved in MP3 files.
e Playback time/remaining playback time
Shows the elapsed time and remaining playback time
(hours: minutes: seconds) of the playing file.
r Playback position
The current playback position is shown by a bar. As playback
progresses, the bar extends from the left.
t Peak value in decibels (dB)
These show the maximum (peak) playback levels in decibels.
y Recording format
This shows the format, sampling frequency and number of
channels of the file being recorded.
u Recording function information
This shows the settings of the dual, pre and automatic
recording functions.
DUAL This shows the dual recording function
status.
This shows the prerecording function status.
PRE
AUTO This shows the automatic recording function
status.
i Transport status (recording standby/recording)
This icon shows the recorder operation status.
Indicator Meaning
Recording standby
09
Recording
0
o Level meters
These show the input signal levels.
p Recording folder name
This shows the name of the folder where the recording file
will be saved.
a Recording file name
The file name that will automatically be given to the
recorded file is shown.
s Recording time/remaining recording time
This shows the elapsed time (hours: minutes: seconds) of the
file being recorded and the remaining available time (hours:
minutes: seconds) on the SD card using the set input source,
file format and sampling frequency.
d Recording position
This bar shows the remaining available time (hours: minutes:
seconds) on the SD card using the set input source, file
format and sampling frequency.
As recording progresses, the bar extends from the left.
f Peak input level in decibels (dB)
Peak input level values are shown in decibels.
When the input level exceeds the peak level, the
appears.
icon
9
TASCAM DR-100MKIII