Taiwanese Model Only: Connecting Using; The D1/D2 Video Output - Pioneer DV-266-S Operating Instructions Manual

02 Connecting up
Connecting using the
component video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other equip-
ment). This should give you the best quality
picture from the three types of video output
available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
TV
DIGITAL AUDIO OUT
COAXIAL
OPTICAL
S
• To set up the player for use with a progres-
sive scan TV, see Component Out on
page 52.
14
En
COMPONENT
VIDEO IN
AUDIO OUT
Y P
B
L
R
P
R
COMPONENT VIDEO OUT
VIDEO OUT
Taiwanese model only:
Connecting using the D1/D2
video output
If your TV is equipped with a D type video
input, you can use a D video cable to connect
this player to your TV.
• Use a D video cable (not supplied) to
connect the VIDEO OUT D1/D2 jacks to a D
type video input on your TV, monitor or
AV receiver.
TV
DIGITAL AUDIO OUT AUDIO OUT
Y P
B
COAXIAL
P
R
OPTICAL
S
COMPONENT VIDEO OUT
VIDEO OUT
Taiwanese model
• The D video output on this player outputs
only NTSC video.
D VIDEO
INPUT
VIDEO OUT
L
D1 /D2
R