Connecting Using An Hdmi Cable (Dv-420V Only); Connecting To A Tv - Pioneer DV-320K Operating Instructions Manual

Connections
Player's rear panel (DV-420V)
AV CONNECTOR (RGB) TV/AV Receiver
To SCART AV
input terminal
Connecting using an HDMI
cable (DV-420V only)
By using an HDMI cable, digital signals can
be transferred to an HDMI-compatible TV on
a single cable with no loss of picture or sound
quality. After connecting, make the player's
resolution and HDMI color settings according
to the HDMI-compatible TV. Also refer to the
HDMI-compatible TV's operating instructions.
 HDMI, the HDMI Logo and High-
Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI
Licensing, LLC.
AC IN
SCART AV
cable (commercially
available)
TV

Notes

This player's interface is designed based on
the High-Definition Multimedia Interface
specification.
 When an HDMI-compatible device is
connected, the resolution is displayed on the
front panel display.
 The resolution of the video signals output
from the player's HDMI OUT terminal
is changed manually. Change the
HDMI Resolution setting (page 31). Settings
for two units can be stored in the memory.

This player is designed for connection to
HDMI-compatible devices. It may not operate
properly if connected to DVI devices.

Connecting to a TV

Player's rear panel (DV-420V)
P
B VIDEO
OUT
P Y
R COAXIAL
HDMI OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT
HDMI cable
(commercially
available)
To HDMI input
terminal
TV
Section
AUDIO OUT
L
R
Match the direction of the plug to
the terminal and insert straight.
13
En
03