Playing Discs - Pioneer DV-266-S Operating Instructions Manual

Getting started

Playing discs

The basic playback controls for playing DVD,
CD, Video CD/Super VCD and WMA/MP3
discs are covered here. Further functions are
detailed in the next chapter.
STANDBY/ON
1 2
4 5
7 8
ENTER
1 If the player isn't already on, press
STANDBY/ON to switch it on.
If you're playing a DVD or Video CD/Super
VCD, also turn on your TV and make sure that
it is set to the correct video input.
2 Press OPEN/CLOSE to open the disc
tray.
OPEN/CLOSE
3
6
ENTER
9 0
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
you're loading a double-sided DVD disc, load
it with the side you want to play face down).
4 Press (play) to start playback.
If you're playing a DVD or Video CD/Super
VCD, a menu may appear. See DVD-Video disc
menus on page 30 and Video CD/Super VCD
PBC menus on page 31 for more on how to
navigate these.
If you're playing an WMA/MP3 disc, it may
take a few seconds before playback starts,
depending on the complexity of the file struc-
ture on the disc.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing
JPEG discs on page 44 for more on playing
these discs.
• See also PhotoViewer on page 59 if the
disc contains both WMA/MP3 audio files
and JPEG picture files (by default, you will
not be able to play the WMA/MP3 files).
04
27
En