Connections; Connecting Using An Audio/Video Cable; Connecting Using A Scart Av Cable; Connecting Using An Hdmi Cable (Dv-220V-K Only) - Pioneer DV220KV Operating Instructions Manual

Connections

 Be sure to turn off the power and unplug the power
cord from the power outlet whenever making or
changing connections.
 Connect the power cord after all the connections
between devices have been completed.
Connecting using an audio/
video cable
Player's rear panel (DV-220V-K)
Connecting using a SCART
AV cable
 The video signal to be output can be selected (AV
Connector Out on page 15).
 Analog audio signals are also output from the
SCART AV connector.
6
En
Yellow
White
Red
Audio/video
cable (included)
To audio/video
input terminals
TV
Player's rear panel (DV-220V-K)
To SCART AV
input terminal
Connecting using an HDMI
cable (DV-220V-K only)
By using an HDMI cable, digital signals can be trans-
ferred to an HDMI-compatible TV on a single cable with
no loss of picture or sound quality. After connecting,
make the player's resolution and HDMI color settings
according to the HDMI-compatible TV. Also refer to the
HDMI-compatible TV's operating instructions.
 HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC.
Notes
 This player's interface is designed based on the High-
Definition Multimedia Interface specification.
 When an HDMI-compatible device is connected, the
resolution is displayed on the front panel display.
 The resolution of the video signals output from the
player's HDMI OUT terminal is changed manually.
Change the HDMI Resolution setting (page 15).
Settings for two units can be stored in the memory.
 This player is designed for connection to HDMI-
compatible devices. It may not operate properly if
connected to DVI devices.
SCART AV
cable (commercially
available)
TV