GENERAL
Verify the following information:
•
Status - displays the connection status of the network.
•
Network – displays the type of network connection.
•
Connection Type - displays as Hardware Ethernet Switch.
•
Physical Address - displays the physical address of the
network card used for the network.
•
MTU - specifies the largest packet size permitted for
Internet transmissions:
– Automatic - sets the MTU (Maximum Transmission Unit
at 1500)
– Automatic by DHCP - sets the MTU according to the
DHCP connection
– Manual - allows you to manually set the MTU to be set.
•
HW Switch Ports - displays the status of each Local
Network Ethernet port.
WIRELESS ACCESS POINT CONNECTION
6.3/
A Wireless Access Point network connection allows wireless
devices to connect to the local area network (LAN) using the 2.4
GHz or 5 GHz Wi-Fi network.
Note:
Once disabled, all wireless devices connected to that wireless
network will be disconnected from the LAN network and Internet.
verizon.com/fios
|
06/ USING NETWORK
CONNECTIONS
©2016 Verizon. All Rights Reserved.
84