STATIC NAT AND
SECURITY LOG
Select a source address in the Specify Address field or
3.
enter an IP address in the text box.
Enter the public IP address.
4.
If using port forwarding, select the Enable Port
5.
Forwarding for Static NAT check box.
Click Apply to save changes.
6.
Repeat these steps to add additional static IP addresses.
7.
SECURITY LOG
7.7/
You can view events that your firewall has blocked by accessing
the security log. Your Fios Router reports events, such as attempts
to establish inbound and outbound connections, attempts to
authenticate at an administrative interface, such as your Fios Router
GUI, firewall configuration, and system start-up.