Verizon Fios-G2100 User Manual page 19

SETTING UP YOUR FIOS ROUTER
2.0/
There are three basic steps to setting up your Fios Router:
Connect your Fios Router to the Internet
Step 1:
Connect your network device to your Fios Router
Step 2:
Configure your Fios Router
Step 3:
Before you begin, if you are replacing an existing Fios Router,
disconnect it. Remove all old Fios Router components, including the
power supply. They will not work with your new Fios Router.
2.0a/ STEP 1 - CONNECT YOUR FIOS ROUTER
Remove your Fios Router, cables, and power adapter from
1.
the box.
Locate your Fios WAN Port. This would be the wall jack
2.
installed previously by Verizon. Note the type of jack may
be either Ethernet or fiber.
If connecting the WAN using Fiber, use the
3.
green fiber cable and plug one end into the
green fiber WAN port on the back of your
Fios Router. Plug the other end of the cable
into the fiber wall jack.
Plug the power cord into the power port on
4.
the back of your Fios Router and then into a
power outlet.
verizon.com/fios |
02/ CONNECTING
YOUR FIOS ROUTER
©2016 Verizon. All Rights Reserved.
18