Table of Contents
Advertisement
Accessing the WebGUI Configuration Page
1. Make sure the connection between your device and the client is correct.
2. Launch the internet browser and enter
Notes:
It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or
later) or Chrome (5.0 or later).
3.The login page appears as follows.
Input the case-sensitive default
Configuration page.
Notes:
•Do not put anything on the top of your device. Do not lay devices to overlap each other when using.
•The device takes 1~2 minutes to initialize, and attach to the network.
PIN Code Verification
If the PIN code of your SIM card is enabled, you will need to input the PIN code by selecting WAN
Settings when you login at the first time.
10 Confidential and Proprietary Information of ZTE CORPORATION
http://192.168.1.1
password "admin", and then click Login to access the WebGUI
ZTE EUFI890 Quick Guide
in the address bar.
Advertisement
Table of Contents
