Access The Internet; Access The Webgui Configuration Page - Zte z Quick Manual

Notes
:
There will be a pop-up window to require the password. Please check the label on the battery
compartment of your device to gain the SSID and preset password information.
5. Wait a moment,

Access the Internet

1. Switch on the device.
2. Establish a connection between your device and the client.
3. After successfully establishing the connection, access the Internet in the Always On or
Manual mode. The default mode is Manual.
Notes:
You can browse the WebGUI Configuration page and click WAN Connection to set the WAN connection
mode.

Access the WebGUI Configuration Page

1. Make sure the connection between your device and the client is correct.
2. Click to Launch the internet browser.
Notes:
It is recommended that you use IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0
or later), Chrome (6.0 or later)
The login page appears as follows.
3.
the connection between your device and the client will be established successfully.
Confidential and Proprietary Information of ZTE CORPORATION 7