Airflow Considerations; Mounting The Switch - Alcatel-Lucent OmniSwitch 6860 Hardware User's Manual

Mounting the Switch

Airflow Considerations

To ensure proper airflow, be sure that your switch is placed in a well-ventilated area and provide minimum
recommended clearance at the front, back and sides of the switch.
Never obstruct chassis air vents.
Note. Clearance is not required at the top and bottom of the chassis.
Mounting the Switch
For information on mounting OmniSwitch 6860 switches, refer to the
Supplies."
page 2-4
Chassis Top View
Chapter 3, "Chassis and Power
OmniSwitch 6860 Hardware Users Guide
Getting Started
}
Rear. 6 inches minimum
at rear of chassis.
Sides. 2 inches minimum
at left and right sides.
}
Front. 6 inches minimum
at front of chassis.
May 2017