Attaching The Belt Clip; Attaching The Wrist Strap; Battery Usage; Battery Tray - Raymarine Ray101 Owner's Handbook Manual

81229_1.book Page 6 Wednesday, November 12, 2003 2:39 PM
6

2.3 Attaching the Belt Clip

To attach the belt clip and adapter:
1. Remove the belt clip and adapter hardware from the packing materials.
2. With the adapter button facing away from the Ray101, slide the adapter
into the notch on the rear of the radio until it snaps into place.
3. Hold the belt clip perpendicular to the Ray101 and slide the belt clip
notch onto the adapter button until it snaps into place.
4. Rotate the belt clip so that the longer end extends above the top of the
radio.
5. Squeeze together the two top ends of the belt clip and attach to your belt
or pant waist.
To remove the radio from the belt clip:
1. Rotate the radio perpendicular to the belt clip.
2. Press the release button at the top of the belt clip.
3. Pull the radio up and away from the belt clip.

2.4 Attaching the Wrist Strap

1. Feed the narrow end of the strap through the two mounting holes at the
top of the radio behind the antenna.
2. Continue feeding the narrow end of the strap through the loop and pull
tight.

2.5 Battery Usage

The Ray101 can be powered by the supplied six (6) Nickel Metal Hydride
(NiMH) batteries or with six (6) regular AA alkaline cells (not supplied),
using the supplied Battery Tray.

Battery Tray

To open the Battery Tray and insert the battery cells:
1. Using a coin or flat blade screwdriver, turn the screw at the base of the
unit counterclockwise1/4 turn to the UNLOCK position.
2. While holding the Ray101 in one hand, use the other hand to push the bat-
tery tray downward and then away to separate it from the back of the
radio.
Ray101 Handheld VHF Radio