Subwoofer Setting Adjustment (Sub W-2)
When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level
of Subwoofer.
The display shows "+6" – "– 6".
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.
Non-Fading Output (Non Fad
When the Non-Fading Output setting is ON, the audio signal does not pass through this unit's
low pass filter (for the Subwoofer), but is output through the RCA output.
• When the Subwoofer Controller setting is only "Sub woofer control External", you can switch the
Non-Fading Output ON/OFF mode. (Refer to page 68.)
-1)
E