Audio Menu 2 Functions
The Audio Menu 2 features the following functions.
Subwoofer Output (Sub W-1)
When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is OFF.
The Subwoofer output phase can be switched between normal, or 0° ("Phase:NOR"), and
reverse, or 180°("Phase:REV"). 0° is the default phase.
• When the Subwoofer Controller setting is "Sub woofer control External", you cannot switch the
Subwoofer ON/OFF mode. In this case, this setting is not necessary. (Refer to page 76.)
• Select the OFF setting when you do not want the Subwoofer to operate.
Subwoofer Setting Adjustment (Sub W-2)
When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level
of Subwoofer.
The display shows "+6" – "–6".
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.