Using The Alarm To Start Play - Onkyo CS-N575D Instruction Manual

> Before Start > Part Names

Using the alarm to start play

1
34
> Install > Initial Setup
2
> Playback
Supplementary information | Advanced Setup | Others
Settings
At the set time, the unit switches on and starts play of
the desired source. You can set two different timers,
"Timer 1" and "Timer 2". Make sure that the clock on
this unit is set correctly. You cannot use the timers if the
clock has not been set.
1. Press on the remote controller to display the
menu.
2. Press 3/4 (b) to select "Timer", then press ENTER
(c).
3. Press 3/4 (b) to select "Timer 1" or "Timer 2" and
press ENTER (c).
Timer
Timer 1
Timer 2
Clock
4. Press ENTER (c) when "Timer Set" is displayed.
5. Press 3/4 (b) to select the source to use for timer
play, then press ENTER (c).
0 The sources you can select are "CD", "FM/DAB"
(CS-N575D) and "FM" (CS-N575).
When you select "FM/DAB" (CS-N575D) or "FM"
(CS-N575), press 3/4 (b) to select a preset
station and press ENTER (c).
6. Press 3/4 (b) to select "Every" or "Once" and press
ENTER (c).
If you select "Every", select days of the week from
amongst "Everyday", "Sunday", "Monday",
"Tuesday", "Wednesday", "Thursday", "Friday",
"Saturday", "Mon-Fri", "Tue-Sat", and "Sat-Sun" and
confirm. If you select "Once", select a day of the
week from amongst "Sunday", "Monday", "Tuesday",
Asb