Power On & Initial Setup - Onkyo CS-N575D Instruction Manual

> Before Start > Part Names
Power On & Initial Setup
Initial Setup
1
3
> Install > Initial Setup
2 2
RED BLINKING
> Playback
Supplementary information | Advanced Setup | Others
Starting up: When you press Í button, the TIMER
indicator on the main unit slowly blinks red, then
ONKYO logo is displayed on the display about 30
seconds later. After this, you can start operating the
unit.
Wi-Fi connection settings
When you first turn the power on, the initial setup
screen is displayed automatically, allowing you to
easily make Wi-Fi connection settings.
0 To redo the initial settings, press
controller, select "Wi-Fi" in "Network" - "Connection
Type", then select "Wi-Fi Setup".
0 A confirmation screen asking you to agree to the
privacy policy is displayed during network setting.
Select "Accept" and press ENTER to indicate
agreement.
To set, select the item with the cursors on the remote
controller and press ENTER to confirm (a). To return to
the previous display, press
a
on the remote
(b).
b
13
En