TP-Link PHAROS SERIES User Manual page 33

AP
MAC Address
SSID
Security Mode
Connected Station
Client
WDS
Root AP BSSID
Root AP SSID
TX Rate
Displays whether the AP function is Enabled or Disabled. It is enabled in Access
Point, Repeater, Bridge, AP Router and AP Client Router modes and disabled in
Client mode by default.
Displays the MAC address of AP interface or client interface.
Displays the wireless network name (SSID).
Displays the security mode you've chosen for your wireless network. There are
three security modes: WPA-PSK, WPA and WEP. None means that no security mode
is selected and all the hosts are allowed to access the wireless network.
Displays the number of the connected stations.
Displays whether the Client function is Enabled or Disabled. It is enabled in Client,
Repeater, Bridge and AP Client Router modes and disabled in Access Point and AP
Router modes by default.
Displays whether the Wireless Distribution System (WDS) is enabled or not.
Displays the basic service set identification (MAC address) of root AP.
Displays the wireless network name of root AP.
Displays the data rate at which the device transmits wireless packets.
- 30 -
Chapter 4 Status Tab