Bridge; Ap Router - TP-Link PHAROS SERIES User Manual

Bridge

Network requirements: Reinforce the wireless signal strength of the root AP device to eliminate the
wireless signal-blind areas. Meanwhile, the wireless users can use the SSID and encryption type different
from those of the root AP device to access the network.
The device in the network: Similar to the Repeater mode, the Bridge mode is used to reinforce the exiting
wireless signal. However, the very difference is that the Bridge has its own SSID and encryption type
different from those of root AP.
Network diagram:
 Eliminate the wireless signal-blind areas
Bridge for wireless signal


AP Router

Network requirements: Establish the wireless network coverage in the campus, community, industrial park
or other public places and so on.
The device in the network: Similar to the home wireless router, the device in AP Router mode connects to
root ADSL/Cable Modem. The difference lies in that the coverage area of this device is wider. Smart
Chapter 2 Operation Modes
- 8 -