Toyota Tundra 2014 Owner's Manual page 49

INFORMATION
●
It may take time if the device connection
is carried out during Bluetooth
playback.
●
Depending on the type of Bluetooth
device being connected, it may be nec-
essary to perform additional steps on
the device.
■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.51)
Leave the Bluetooth
tion where the connection can be es-
tablished.
 When the engine switch is in the "ACC" or
"ON" position, the system searches for a
nearby registered device.
 The system will connect with the regis-
tered device that was last connected, if it
is nearby.
■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.48)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
®
audio
®
®
device in a loca-
®
man-
■
RECONNECTING THE Bluetooth
PHONE
®
If a Bluetooth phone is disconnected
due to poor reception from the
®
Bluetooth network when the engine
switch is in the "ACC" or "ON" position,
the system automatically reconnects
®
the Bluetooth phone.
®
 If a Bluetooth
phone is disconnected on
purpose, such as turning it off, this does
not happen. Reconnect the Bluetooth
phone manually.
®
2. Bluetooth SETTINGS
®
2
®
49