4. MEMORY POINTS
REGISTERING AREAS TO
AVOID
1
Select "New".
2
Select the desired item to search for
the location. (P.198)
3
Select either
change the size of the area to be avoid-
ed and select "OK".
4
Select "OK" when the editing area to
avoid screen appears.
INFORMATION
●
If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the
area to be avoided may be shown.
●
Up to 10 locations can be registered as
points/areas to avoid.
232
The name, location and/or area size of
a registered area can be edited.
1
2
or
to
3
4
EDITING AREAS TO AVOID
Select "Edit".
Select the area and select "OK".
Select the item to be edited.
No.
Function
Select to edit the name of
the area to avoid.
Select to set display of the
area to avoid name on/off.
Select to edit area location.
Select to edit area size.
Select to set the area to
avoid function on/off.
Select "OK".
Page
233
233
233