Toyota Tundra 2014 Owner's Manual page 165

INFORMATION
●
Depending on the type of phone, certain
functions may not be available.
●
Contact data is managed independently
for every registered phone. When one
phone is connected, another phone's
registered data cannot be read.
UPDATE CONTACTS FROM
PHONE
Operation methods differ between
PBAP compatible and PBAP incom-
patible but OPP compatible Bluetooth
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the contacts can-
not be transferred.
■
FOR PBAP
®
Bluetooth PHONES
1
Select "Update
Phone".
 Contacts are transferred automatically.
2
Check that a confirmation screen is
displayed when the operation is com-
plete.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
"1234" into the Bluetooth
 If another Bluetooth
when transferring contact data, depending
on the phone, the connected Bluetooth
device may need to be disconnected.
 Depending on the type of Bluetooth
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
COMPATIBLE
Contacts from
®
phone.
®
device is connected
■
FOR PBAP INCOMPATIBLE BUT
OPP COMPATIBLE
PHONES
This operation cannot be performed
while driving.
1
Select "Update
Phone".
2
Transfer the contact data to the system
using a Bluetooth
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
®
OBEX authentication may be required
when transferring contact data. Enter
"1234" into the Bluetooth
 To cancel this function, select "Cancel".
3
Select "Done" when it appears on the
screen.
4
Check that a confirmation screen is
displayed when the operation is com-
plete.
®
®
2. SETUP
Bluetooth
Contacts from
®
phone.
®
phone.
165
®
7