HP EliteBook 8770w RAID User Manual page 20

4. In the Device Configurations window, select RAID under SATA Device Mode. Click Confirm.
The following message is displayed: "Changing this setting may require reinstallation of your
operating system. Are you sure you want to proceed?"
NOTE:
switch between AHCI and RAID modes without reinstalling the operating system. If you use a
different hard drive image, you may need to reinstall the operating system.
NOTE:
Intel option ROM screen is visible during the computer bootup time.
5. Select File > Save Changes and Exit. Then, click Yes to save the changes. If you do not want
to apply your changes, select Ignore Changes and Exit.
CAUTION:
Setup changes, because the Complementary Metal Oxide Semiconductor (CMOS) could
become corrupted. Turn the computer off only after exiting the
6. After the operating system boots, you can begin the RAID migration procedure.
16 Chapter 5 RAID volume setup
The hard drive image supplied with your computer contains drivers that allow you to
Below SATA Device Mode, there is a check box for Ctrl I Prompt. If this is selected, the
Do NOT turn the computer power off while the ROM is saving the f10 Computer
f10 Setup screen.