HP EliteBook 8770w RAID User Manual page 16

To configure SATA mode in Computer Setup (BIOS):
1. Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2. Press
3. Use a pointing device or the arrow keys to select System Configuration > Device
Configurations.
4. In SATA Device Mode, change the value to RAID.
5. Use the arrow keys to select File > Save Changes and Exit, and then press enter.
For more information on Intel Smart Response Technology, see
chipsets/sb/CS-032826.htm?wapkw=Smart%20Response%20Technology.
12 Chapter 4 Intel Rapid Storage Technology
f10 to enter Computer Setup (BIOS).
esc while the "Press the ESC key for Startup
http://www.intel.com/support/