Inserting The Compactflash Card - Siemens SINUMERIK 840D sl Manual

As well as the basic software for SINUMERIK and the firmware for SINAMICS, the
CompactFlash Card also contains:
● User data (programs, configuration data, parameter settings)
● Version info (serial number, version, type designation)
● License key This means that the CompactFlash Card can be inserted into another control
5.2.2

Inserting the CompactFlash card

Proceed as follows
NOTICE
ESD: you must discharge yourself at the cabinet or ground terminal before touching the
CompactFlash Card.
Please proceed as follows:
1. Switch off the power supply.
2. Gently insert the new CompactFlash Card into the plug-in slot until it clicks into place.
3. Switch the power supply on again.
NCU
Manual, 03/2010, 6FC5397-0AP10-3BA0
unit without requiring a license change.
When properly installed, the card does not extend beyond the housing.
Figure 5-3 Inserting the CompactFlash card
Operating and display elements
5.2 CompactFlash Card
35