Error Messages; Understanding Auto Ta And Eq Error Messages - Pioneer Super Tuner III D AVH-P6850DVD Operation Manual

Additional Information

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error
message.
Message
ERROR-02
ERROR-05
ERROR-A0
DIFFERENT REGION DISC
NON PLAYABLE DISC
TEMPERATURE PROTECTION
IN MOTION
PROTECT
TRACK SKIPPED

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
Message
Error check MIC
Error check front SP, Error
check FL SP, Error check FR SP,
Error check center SP, Error
check RL SP , Error check RR SP ,
Error check subwoofer
Cause
Dirty disc
Scratched disc
The disc is loaded upside down
Electrical or mechanical
Electrical or mechanical
The disc does not have the same re-
gion number as this unit
This type of disc cannot be played
by this unit
The temperature of this unit is out-
side the normal operating range
All the files on the inserted disc are
secured by digital rights manage-
ment (DRM)
The inserted disc contains WMA
files that are protected by digital
rights management (DRM)
Cause
Microphone is not connected.
The microphone cannot pick up the
measuring tone of a speaker.
Black plate (105,1)
Action (See)
Clean disc.
Replace disc.
Check that the disc is loaded correctly.
Press RESET.
Consult your dealer or your nearest author-
ized Pioneer Service Station.
Replace the DVD video with one bearing the
correct region number.
Replace the disc with one this unit can play.
Wait until the unit's temperature returns to
within normal operating limits.
Replace disc.
Replace disc.
Action
Plug the supplied microphone securely into
the jack.
! Confirm that the speakers are connected
correctly.
! Correct the input level setting of the power
amp connected to the speakers.
! Set the microphone correctly.
<CRB2163-B>105
Appendix
105
En