Error Messages - Pioneer AVH-X8750BT Owner's Manual

Error messages

When problems occur with this product, an error message appears on the display. Refer to
the table below to identify the problem, then take the suggested corrective action. If the error
persists, record the error message and contact your dealer or your nearest Pioneer service
center.
Common
Message Cause
This product fails to oper-
ate or the speaker connec-
AMP Error
tion is incorrect; the protec-
tive circuit is activated.
The temperature of this
TEMP
product is outside the
normal operating range.
Product overheat.
System will be shut
down automatically in
1 minute. Restart the
product by ACC-Off/
The temperature is too high
On may fix this prob-
for this product to operate.
lem. If this message
keeps showing up, it
is possible that some
problem occured in the
product.
Error. If you have
replaced your car or
steering wheel control,
Failed to set the steering
please press "Reset"
wheel control.
to clear existing set-
tings or you can press
"Cancel" to try again
Error. Please press the
button of the steering
wheel remote, other- The time-out occurred.
wise the button you
pressed is not usable.
Action
Check the speaker connection.
If the message fails to disappear
even after the engine is switched
off/on, contact your dealer or an
authorized Pioneer Service Station
for assistance.
Wait until this product returns to
a temperature within the normal
operating limits.
Follow the instructions displayed
on the screen. If this does not solve
the problem, contact your dealer or
an authorized Pioneer Station for
assistance.
Press "RESET" to clear existing
settings or "Cancel" to set again.
Retry.
Disc
Message Cause
The disc is dirty.
The disc is scratched.
The disc is loaded upside
Error-02-XX/FF-FF
down.
There is an electrical or
mechanical error.
The disc does not have the
Different Region Disc same region number as
this product.
This type of disc cannot be
Unplayable Disc
played on this product.
This type of file cannot be
Unplayable File
played on this product.
The inserted disc contains
Skipped
DRM protected files.
All the files on the inserted
Protect disc are embedded with
DRM.
This DivX rental has The inserted disc contains
expired. expired DivX VOD content.
Files that cannot be
Video resolution not
played on this product are
supported
included in the file.
The playback history for
Unable to write to flash
VOD contents cannot be
memory.
saved for some reason.
This product's DivX regis-
Your device is not
tration code has not been
authorized to play this
authorized by the DivX VOD
DivX protected video.
contents provider.
Video frame rate not DivX file's frame rate is
supported more than 30 fps.
Audio Format not This type of file is not sup-
supported ported on this product.
External storage device (USB, SD)
Message Cause
Error-02-9X/-DX Communication failed.
Appendix
Action
Reference
Clean the disc.
Replace the disc.
Check that the disc is loaded
correctly.
Press the RESET button.
page 6
Replace the DVD with one bearing
the correct region number.
Replace the disc with one that can
be played on this product.
Select a file that can be played.
page 75, page 80
The protected files are skipped.
Replace the disc.
Select a file that can be played.
Select a file that can be played.
page 75, page 80
Retry.
If the message appears frequently,
consult your dealer.
Register this product to the DivX
VOD contents provider.
Select a file that can be played.
Select a file that can be played.
page 75, page 80
Action
Reference
Turn the ignition switch OFF and
back ON.
Disconnect the USB storage
device.
Change to a different source. Then,
return to the USB storage device.
71
En