Xm Tuner; Basic Operations; Selecting An Xm Channel Directly; Switching The Xm Display - Pioneer Premier DEH-P590IB Operation Manual

Available accessories

XM tuner

Basic Operations

You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner's operation manual.
! With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.
1 1 1 1
5 5 5
1 XM band indicator
2 XM channel number indicator
3 XM preset number indicator
4 XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
5 XM text information
Shows the text information of broadcast
channel.
1 Press SOURCE to select the XM.
2 Press BAND to select an XM band.
Press BAND until the desired XM band is dis-
played, XM-1, XM-2 or XM-3.
3 To perform tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
2 2 2 3 3 3 4 4 4
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)

Selecting an XM channel directly

When using the remote control, you can select
the XM channel directly by entering the de-
sired channel number.
1 Press DIRECT.
Channel number input display appears.
2 Press 0 to 9 buttons to enter the desired
channel number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The XM channel of entered number is
selected.
# After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.

Switching the XM display

% Press DISPLAY to switch the XM display.
Text information (channel name)—Artist name
and text information—Song title and text infor-
mation—Category name and text information
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
1 When you find a station that you want
to store in memory press LIST.
Section
03
33
En