C,--X_M_tu_n_e_r
)
Section
C
) .
Introduction of advanced
XM tuner operation
CD
Function display
Shows the function names,
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Channel mode appears on the display,
• To return to the channel display, press BAND.
o
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the channel display.
[!J
Switching the XM display
•
Press DISPLAY to switch the XM display.
Each press of DISPLAY changes the XM dis-
play in the following order:
Text information-Category name and text in-
formation-Artist name and text information
-Song title and text information
[!J
Storing and recalling
broadcast stations
You can easily store up to six broadcast sta-
tions for later recall.
1
When you find a station that you want
to store in memory press LIST to switch to
the preset channel list mode.
2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number; press and
hold to store.
The XM preset number you have selected will
flash and then remain
lit.
The selected station
has been stored in memory.
•
If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celed automatically.
o
Notes
•
Up to 18 stations, six for each of three XM
bands can be stored in memory.
• You can also store stations assigned to preset
tuning numbers by pressing and holding one
of the preset tuning buttons
1-6
on the re-
mote control.
[!J
Swiching the XM channel
select setting
You can switch the channel select mode to
either selecting with channel number or with
category.
1
Use MULTI-CONTROL to select
FUNCTION.
Channel mode appears on the display.
En
@