Sirius Satellite Radio Tuner - Pioneer DEH-P8300UB Owner's Manual

Available accessories
Select an XM band.
1 Press BAND/ESC.
! Band can be selected from XM-1, XM-2 or
XM-3.
Select a channel.
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a de-
sired channel category. (Refer to Selecting
a channel from a channel category on this
page.)
Switching the XM display
1 Press and hold DISP/
/SCRL.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Press (list).
Preset screen is displayed.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing M.C.
up or down.
Advanced operations using
special buttons
Selecting the channel select mode
1 Press S.Rtrv/SAT MODE to cycle between:
Channel number (channel number select set-
ting)—Category (channel category select set-
ting)
Function and operation
1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by num-
ber, channels in any category can be selected. Se-
lect by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select set-
ting)—Category (channel category select set-
ting)
Selecting a channel from a
channel category
1 Switch the channel select settings to
Category.
Refer to Selecting the channel select mode on
this page or Channel mode (channel select
mode setting) on this page.
Available accessories
2 Push M.C. up or down to select the de-
sired channel category.
3 Push M.C. left or right to select the de-
sired channel in the selected channel cate-
gory.
Displaying the Radio ID
1 Select the channel select settings to
Channel number.
Refer to Selecting the channel select mode on
this page or Channel mode (channel select
mode setting) on this page.
2 Push M.C. left or right to select RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# RADIO ID and the ID codes are repeatedly dis-
played one after the other.

SIRIUS Satellite Radio tuner

You can use this unit to control a SIRIUS Satellite
Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on these
points. For all other information on using the
SIRIUS tuner, please refer to the SIRIUS opera-
tion manual.
Listening to SIRIUS Satellite Radio
1 2 3 4
5
1 SIRIUS band indicator
2 SIRIUS channel number indicator
3 SIRIUS preset number indicator
4 SIRIUS channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
I.R is displayed during the Instant Replay
mode.
5 SIRIUS channel name
Shows the channel name of broadcast chan-
nel.
Select a SIRIUS band.
1 Press BAND/ESC.
! Band can be selected from SR-1, SR-2 or
SR-3.
Select a channel.
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a de-
sired channel category. (Refer to Selecting
a channel from a channel category on the
next page.)
Section
03
19
En