Ring Wizard Example - Planet IGS-604HPT-M12 User Manual

4.20.6 Ring Wizard Example:

The above topology often occurs on using ERPS protocol. The multi switch constitutes a single ERPS ring; all of the switches
only are configured as an ERPS in VLAN 3001, thereby constituting a single MRPP ring.
The scenario is described as follows:
1. Disable DHCP client and set proper static IP for Switches 1, 2 & 3. In this example, switch 1 is 192.168.0.101, switch 2
is 192.168.0.102 and switch 3 is 192.168.0.103.
2. On switches 1, 2 & 3, disable Spanning Tree protocol to avoid confliction with ERPS.
Figure 4-20-6: Ring Example Diagram
Switch ID Port MEP ID
Port 1
Switch 1
Port 2
Port 1
Switch 2
Port 2
Port 1
Switch 3
Port 2
Table 4-2: ERPS Configuration Table
RPL Type VLAN Group
1 None
2
Owner
4 None
3
Neighbour
6 None
5 None
363
User's Manual of IGS-604HPT-M12
3001
3001
3001
3001
3001
3001