Dscp Classification - Planet IGS-604HPT-M12 User Manual

 Translate
 Classify
 Egress

Remap DP0

Remap DP1
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.9.10 DSCP Classification

This page allows you to map DSCP value to a QoS Class and DPL value. The DSCP Classification screen in
appears.
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Click to enable Classification at Ingress side.
There are the following configurable parameters for Egress side –
Remap DP0 Controls the remapping for frames with DP level 0.
Remap DP1 Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.
Figure 4-9-11: DSCP Classification Screenshot
195
User's Manual of IGS-604HPT-M12
Figure 4-9-11