Setup Wizard - Planet XRT-101A User Manual

Setup Wizard

The first time you connect to the Internet Broadband Router, the Setup Wizard will run
automatically. (The Setup Wizard will also run if the Internet Broadband Router's default
setting are restored.)
1. Step through the Wizard until finished.
•
You need to know the type of Internet connection service used by your ISP. Check the
data supplied by your ISP.
•
The common connection types are explained in the tables below.
2. On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
•
If the connection fails, check your data, the Cable/DSL modem, and all connections.
•
If your ISP has recorded your MAC (hardware) address, exit the Wizard and select
MAC Address on the Advanced menu. Change the MAC address to match the value
expected by your ISP.
Cable Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
@Home type
service.
DSL Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
PPPoE
PPTP
Details
Your IP Address is allocated
automatically, while connecting
to you ISP.
Your ISP allocates a permanent
IP Address to you.
The IP Address is allocated
automatically, but a "Host
Name" and "Domain Name" are
allocated to you. Sometimes, the
ISP will record the MAC
(Hardware) address of your PC.
Details
Your IP Address is allocated
automatically, while connecting
to your ISP.
Your ISP allocates a permanent
IP Address to you.
You connect to the ISP only
when required. The IP address is
allocated automatically.
Mainly used in Europe.
You connect to the ISP only
when required. The IP address is
usually allocated automatically,
but may be Static (Fixed).
ISP Data required
None.
IP Address allocated to you.
Host Name and Domain
Name; sometimes the MAC
(hardware) address.
ISP Data required
None.
IP Address allocated to you.
User name and password.
•
PPTP Server IP Address.
•
User name and password.
•
IP Address allocated to
you, if Static (Fixed).
Setup
13