Power Over Ethernet Powered Device - Planet IGS-604HPT-M12 User Manual

4.16.1 Power over Ethernet Powered Device

3~5 watts
6~12 watts
10~12 watts
3~12 watts
3~25 watts
30 watts
Since the PoE port of IGS-604HPT-M12 supports 53V DC PoE power output, please check and
assure the powered device's (PD) acceptable DC power range is from 53V DC; otherwise, it will
damage the PD.
Voice over IP phones
Enterprises can install PoE VoIP phones, ATA sand other
Ethernet/non-Ethernet end-devices in the center where UPS is installed for
un-interruptible power system and power control system.
Wireless LAN Access Points
Access points can be installed at museums, sightseeing sites, airports,
hotels, campuses, factories, warehouses, etc.
IP Surveillance
IP cameras can be installed at enterprises, museums, campuses, hospitals,
banks, etc. without worrying about electrical outlets.
PoE Splitter
PoE Splitter split the PoE 56V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
High Power PoE Splitter
High PoE Splitter split the PoE 56V DC over the Ethernet cable into 24/12V
DC power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
High Power Speed Dome
Its state-of-the-art design fits in various network environments like traffic
centers, shopping malls, railway stations, warehouses, airports and
production facilities for the most demanding outdoor surveillance
applications. No electricians are needed to install AC sockets.
319
User's Manual of IGS-604HPT-M12