Add Fabric Softener - Inglis 7mwtw4915ew Use And Care Manual

7.
Select cycle options, if desired
If you would like to add an Extra Rinse, Fabric Softener,
Fabric Softener with Extra Rinse and/or use the Stain Treat
option, turn the knob for that feature.
8.
Press START/Pause/Unlock Lid
to begin wash cycle
Press the START/Pause/Unlock Lid button to start the wash
cycle. When the cycle has finished, the Cycle Complete
indicator will light. Promptly remove items after cycle has
completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the lid to add items:
If you need to open the lid to add 1 or 2 missed items:
Press START/Pause/Unlock Lid; the lid will unlock once
the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close lid
and press START/Pause/Unlock Lid again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
9.

Add fabric softener

During the final rinse, wait until the
washer has completed filling, press
the START/Pause/Unlock Lid button
to Pause the washer. Lift the lid and add the measured
recommended amount of liquid fabric softener. Do not allow
liquid fabric softener to spill, splash, drip, or run into the basket
or on load. Do not use more than the recommended amount.
Close the lid and press the START/Pause/Unlock Lid button
again to start the washer.
IMPORTANT: Fabric Softener option must be selected to
ensure proper distribution of the fabric softener during the
rinse portion of the cycle.
9