DISASSEMBLY AND REASSEMBLY
3-3. Disassembling the Freezer
There is a heater wire at the bottom of the freezer compartment. Before disassembling the
door, be sure to disassemble the heater housing!
Caution
How To Do
1. Open the freezer compartment door and remove
the screw fixing the hinge cover (①) at the
bottom with the (+) screw driver.
Disassemble the freezer door only after
disassembling the fridge door.
Caution
2. Separate the housing connector (②) at the
bottom.
3. Separate the middle hinge cap by lifting it up.
The shape of the middle hinge cap is "D".
When reassembling the cap, assemble it in
the right direction after checking the shape
of the shaft.
Caution
4. Separate the freezer door from the middle hinge
shaft by lifting the middle hinge shaft (③) up
slightly and sliding the door in the direction of
the arrow.
5. Tilt the freezer compartment door forward
so that it does not interfere with the middle
hinge and then lift the door up to separate it
completely.
Take care not to drop the door.
Caution
Descriptive Picture
19