DISASSEMBLY AND REASSEMBLY
3-2. Refrigerator Door
How To Do
1. Remove the 3 screws fixing the Top Table and
separate the Top Table (①).
2. Separate the 2 housing connectors (②) from the
hinge at the top left of the fridge compartment
door and the 1 housing connector (②-1) from
the hinge at the top right of the door.
To separate the housing connectors more
easily, pull the connector while holding down
the fixing hook (③).
Make sure to unplug the power cord
before performing the procedures
above.
Caution
Note. The number of housing units may differ
depending on the model.
3. As shown in the picture, Remove water tube
from hinge (4) by holding at the both sides of
the Tube Fitting and pulling it out. And, remove
the Tube Fitting (5) by pulling the water hose
after pushing in the locking ring tab at the end
of the Tube Fitting.
Descriptive Picture
2
2
3
3 3
18
2-1
2-1
2-1