Table of Contents
Advertisement
MAN-DEH-P4800MP-GB.fm Page 6 Thursday, September 29, 2005 11:55 AM
Installation
2. Fastening the unit to the factory radio mounting bracket.
Select a position where the screw holes of the bracket
and the screw holes of the head unit become aligned
(are fitted) and tighten the screws at 2 places on each
side. Use either truss screws (5 x 8 mm) or flush
surface screws (5 x 9 mm), depending on the shape of
the screw holes in the bracket.
Screw
Dashboard or Console
Factory radio mounting bracket
Fixing the front panel
If you do not operate the Removing and Attaching the Front Panel Function, use the
supplied fixing screws and fix the front panel to this unit.
1. Fix the front panel to the unit using fixing screws.
Fixing screw
Before You Start
If you want to dispose this product, do not mix it with general household
waste. There is a separate collection system for used electronic
products in accordance with legislation that requires proper treatment,
recovery and recycling.
Private households in the 25 member states of the EU, in Switzerland and Norway
may return their used electronic products free of charge to designated collection
facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct
method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary
treatment, recovery and recycling and thus prevent potential negative effects on the
environment and human health.
About this unit
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The
RDS (radio data system) function operates only in areas with FM stations broadcasting
RDS signals.
! CAUTION
• Do not allow this unit to come into contact with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat could result from contact with liquids.
• "CLASS 1 LASER PRODUCT"
• This product contains a laser diode of higher class than 1. To ensure continued
safety, do not remove any covers or attempt to gain access to the inside of the
product. Refer all servicing to qualified personnel.
• The Pioneer CarStereo-Pass is for use only in Germany.
• Keep this manual handy as a reference for operating procedures and precautions.
• Always keep the volume low enough so that you can hear sounds from outside the
vehicle.
• Protect this unit from moisture.
• If the battery is disconnected or discharged, the preset memory will be erased and
must be reprogrammed.
6
Hide quick links:
Advertisement
Table of Contents
