Other Functions; Using The Aux Source; About Aux1 And Aux2; Selecting Aux As The Source - Pioneer DEH P4800MP Operation Manual

MAN-DEH-P4800MP-GB.fm Page 30 Thursday, September 29, 2005 11:55 AM

Other Functions

Using the AUX source

This unit can control up to two auxiliary equipments such as VCR or portable devices
(sold separately). When connected, auxiliary equipments are automatically read in as
AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and
AUX2 sources is explained below.

About AUX1 and AUX2

You have two methods to connect auxiliary equipments to this unit.
AUX1 source:
When connecting auxiliary equipment using a stereo mini plug cable
* Insert the stereo mini plug into the input jack on this unit.
For more details, refer to the installation manual.
The allocation of this auxiliary equipment is automatically set to AUX1.
AUX2 source:
When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold
separately)
* Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold
separetely) to connect this unit to auxiliary equipment featuring RCA output.
For more details, refer to the IP-BUS-RCA Interconnector owner's manual.
The allocation of this auxiliary equipment is automatically set to AUX2.
• You can only make this type of connection if the auxiliary equipment has RCA
outputs.

Selecting AUX as the source

* Press SOURCE to select AUX (AUX1 or AUX2) as the source.
Press SOURCE until AUX appears in the display.
• If the auxiliary setting is not turned on, AUX cannot be selected. For more details,
see "Switching the auxiliary setting" on page 29.

Setting the AUX title

The title displayed for each AUX1 or AUX2 source can be changed.
1. After you have selected AUX as the source, press FUNCTION and hold until
TITLE IN appears in the display.
2. Press 8 or 2 to select a letter of the alphabet.
Each press of 8 will display a letter of the
alphabet in A B C ... X Y Z, numbers and
symbols in 1 2 3 ... > [ ] order. Each
press of 2 will display a letter in the
reverse order, such as Z Y X ... C B A
order.
3. Press 6 to move the cursor to the next character position.
When the letter you want is displayed, press 6 to move the cursor to the next position
and then select the next letter. Press 4 to move backwards in the display.
4. Move the cursor to the last position by pressing 6 after entering the title.
When you press 6 one more time, the entered title is stored in memory.
5. Press BAND to return to the playback display.
30