Barcode Scanner (Optional) - Miele PG 8527 Operating And Installation Instructions

Barcode scanner (optional)

Barcode scanners can be connected to
the washer through the multiport on the
unclean side and, if available, on the
clean side as well.
The following functions are available for
barcode scanning:
– User scan load
– User scan unload
– Scan the load
All barcode scanner functions are
available at every operating level. They
can be activated independently of each
other.
A maximum of 30 separate load
barcodes can be scanned. The most
recently scanned barcode can be
removed from the list, using +C.
The scanned barcodes are transmitted
to the record of users and/or loads.
The configuration of the serial interface
for the barcode scanner is described in
the section "PC / print
functions / interface configuration" in
the programming manual.
Activation of the barcode scan is
described in the section "System
functions / Barcode" in the
Programming manual.
When the barcode scan has
activated, the following steps are
shown in the display.
36