Advertisement
FOR MORE THAN 8 TRANSMITTERS
1.
Using the supplied BNC-BNC cables, connect the Antenna Output
of each transmitter to the Antenna Inputs of the PA821A.
Use the 1 ft. jumper BNC-BNC cable to connect the MAIN Output
2.
of the PA821A to the
3.
Connect another Antenna Output (from a ninth PSM transmitter,
second PA821A or other antenna port) to the
Expansion Port.
Attach an antenna to the A + B OUT of the Expansion Port. For
4.
wideband applications, use the PA805-SWB directional antenna,
Figure 3.
PSM Transmitters
AC Power
A IN of the Expansion Port.
B IN of the
50Ω BNC
FIGURE 3
SPECIFICATIONS
RF Carrier Frequency Range
System Gain
Input AC Line Voltage
Maximum Input Line Power
Maximum Current Drain
Maximum RF Input Power
Input Signal Indicator
Threshold
Impedance
Operating Temperature
Range
NOTE: Electrical safety approval is based on a maximum ambient
temperature of 30°C.
Overall Dimensions
Net Weight
Input/Output Connector Type
FURNISHED ACCESSORIES
(8) 2 ft. Coaxial Cable (RG58C/U)
1 ft. jumper
120 VAC Power Line Cord
230 VAC Power Line Cord
240 VAC Power Line Cord (U.K.)
OPTIONAL ACCESSORIES
Wideband Unidirectional Antenna (470-952 MHz)
10 ft. Coaxial Cable (RG-8X/U)
25 ft. Coaxial Cable (RG-8X/U)
50 ft. Coaxial Cable (RG-8X/U)
CERTIFICATIONS
PA821A: Certified to FCC Part 74 (FCC ID No. DD4PA821A).
Certified in Canada by IC to RSS-123 AND RSS-102 (Certification No. IC:
616A-PA821A). UL LISTED to UL6500 (2nd Edition) and cUL LISTED
to CAN/CSA E60065-00. Meets the Essential Requirements of the Eu-
ropean R&TTE Directive 99/5/EC, eligible to bear CE mark. Meets EMC
requirements of EN 301 489 Parts 1 and 9 and is GS-Certified to EN
60065 (6th Edition). Conforms to Australian EMC requirements, eligible to
bear C-Tick mark (N108).
LICENSING
Changes or modifications not expressly approved by Shure Incorporated
could void your authority to operate the equipment. Licensing of Shure
wireless microphone equipment is the user's responsibility, and licensability
depends on the user's classification and application, and on the selected
frequency. Shure strongly urges the user to contact the appropriate
telecommunications authority concerning proper licensing, and before
choosing and ordering frequencies.
THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFESSIONAL
ENTERTAINMENT AND SIMILAR APPLICATIONS.
THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUEN-
CIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR
NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FRE-
QUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION.
Licensing: Note that a ministerial license to operate this equipment may
be required in certain areas. Consult your national authority for possible
requirements.
4
100-240 Vac, 50/60 Hz
150VA max
0.42-1.5 Amperes
(Amperes = 150 VA/Input AC Line Voltage)
24 dBm (250 mW) per channel
+4 dBm (2.5 mW), +2 dBm (1.6 mW) typical
0° F (-18° C) to +145° F (+63° C)
43.4 mm high x 398.8 mm wide x331.5 mm
deep (1 11/16 in. H x 15 11/16 in. W
(10 lbs unpackaged, without power and
BNC-type 8 input, 1 output ACTIVE
2 inputs, 1 output EXPANSION PORT
NOTE
470-952 MHz
+0/-5 dB
70W
50 Ω nominal
x 13 1/2 in. D)
4.53 Kg
RF cables)
UA802
95J2035
95A8389
95A8247
95A8713
PA805SWB
PA725
UA825
UA850
Advertisement
